XNUCLEO-F401RE płytka zgodna z NUCLEO-F401RE
XNUCLEO-F401RE płytka zgodna z NUCLEO-F401RE, dzięki kilku usprawnieniom momentami znacznie ją przewyższająca.
Dane podstawowe płytki:
- Zgodna z NUCLEO-F401RE, mikrokontroler Cortex-M4 STM32F401RET6
- Posiada złącza umożliwiające montaż shieldów Arduino
- Złącza ST Morpho headers zapewniające dostęp do wszystkich pinów I/O STM32,
- Obsługa mbed, build prototype quickly by mbed SDK and online tools
- Comprehensive free software HAL library including a variety of software examples
- W zestawie znajduje się osobny moduł programatora ST-LINK/V2, który może zostać wykorzystany z innych konstrukcjach
Advantages
| Compare | XNUCLEO | NUCLEO | Remarks |
|---|
| Arduino compatibility | UNO, Leonardo | UNO | XNUCLEO can be configured by jumper to compatible with UNO (default) or Leonardo |
| Arduino ICSP interface | Yes | None | ICSP is required by certain kinds of shields |
| Common interfaces are connected via | Jumpers | 0Ω resistors | Jumpers are much easier to use, need no soldering |
| Morpho headers mark | Most | None | Now you can check the PCB mark instead of datasheet |
| DC input | Yes | None | A convenience |
| ST-LINK/V2 | Separated | Integrated | ST-LINK/V2 can be used anywhere else |
| USB fuse | Yes (500mA) | None | The computer USB interface might be harmed without fuse |
| UART debugging | Available while in-circuit debugging | Not available while in-circuit debugging | The NUCLEO integrated ST-LINK/V2 functional chip can be simulated as serial port, however, it's not available while in-circuit debugging, whereas XNUCLEO features a stand-alone USB TO UART chip. |
| UART indicator | Yes | None | Data communication is visible now |
| Button position | Close to PCB edge | Close to Arduino connector | The button won't be untouchable when connecting with an Arduino shield if it were close to the PCB edge |
| Comes with USB cable | Yes | None | |
| PCB dimension | 70mm x 77.5mm | 70mm x 82.5mm | |
What's on the XNUCLEO-F401RE
- STM32F401RET6
- Core : ARM® 32-bit Cortex™-M4
- Operating frequency : 84MHz
- Operating voltage : 1.7V-3.6V
- Package : LQFP64
- Memories : 512kB Flash, 96kB SRAM
- Interfaces : 1 x SDIO, 1 x USB 2.0 FS, 3 x SPI, 3 x USART, 2 x I2C, 3 x I2S
- AD/DA : 16 x AD (12 bit)
- SPX3819M5 : 3.3V voltage regulator
- AMS1117-5.0 : 5.0V voltage regulator
- CP2102 : USB to UART convertor
- Arduino connector : for connecting Arduino shields
- ICSP interface : Arduino ICSP
- USB TO UART
- SWD interface : for programming and debugging
- ST Morpho headers : access to VCC, GND and all the I/Os, easy for expansion
- 6-12V DC input
- User button
- Reset button
- 500mA fast self-recovery fuse
- Power indicator
- User LED
- Serial port Rx/Tx indicator
- ADC/I2C selection jumper
- short B and C : Arduino A4, A5 is used as ADC
- short B and A : Arduino A4, A5 is used as I2C
- MCU current test jumper : for low power tests
- User button jumper
- short the jumper to connect to I/Os used in example code
- open the jumper to connect to other custom pins via jumper wires
- Power selection jumper
- short 5V and U5V : powered from USB connection
- short 5V and E5V : powered from external power supply
User LED jumper
- short the jumper to connect to I/Os used in example code
- open the jumper to connect to other custom pins via jumper wires
- USB TO UART/Arduino selection jumper
- short B and C : MCU UART is connected to USB TO UART interface
- short B and A : MCU UART is connected to Arduino interface
XNUCLEO-F401RE Dimension
Downloads
Development resources: demo codes, schematic, datasheets, etc.
Click here to download
Package Contains
- XNUCLEO-F401RE x 1
- ST-LINK/V2 (mini) x 1
- USB type A plug to mini-B plug cable x 1
