TL Audio C-1 Dual Valve Compressor

09-06-2012, 19:38
Aukcja w czasie sprawdzania była zakończona.

Aktualna cena: 2 500 zł

Użytkownik maly72

numer aukcji: 2328802988

Miejscowość Warszawa

Koniec: 21-05-2012 10:54:33

Dodatkowe informacje:
Stan: Używany

C-1 Dual Valve Compressor Stan wizualny jak na zdjęciach, całkowicie sprawny, bez przeróbek. In just three years, the C-1 Dual Valve Compressor has established itself as an industry standard dynamics processor. Rather than slavishly imitating designs of the past, we developed a compressor that combines unrivalled sound quality with superb flexibility: the C-1 is designed to be used - all the time! All controls are continuously variable (unlike some other valve units with switched parameters) and high quality onboard mic pre amps allow direct-to- tape recording of microphone sources. Stereo front panel auxiliary inputs mean a keyboard or guitar can feed straight into the C-1 and down to tape with a minimum of fuss. Whether the C-1 is tracking vocals and instruments or adding roundness and warmth to a complete mix, it will become an indispensable part of your signal path within hours. The C-1 features a low noise solid state pre amp followed by two valve stages per channel. The valves are twin triode ECC83 / 12 AX7A types, run from a stabilised 250v DC power supply. The first valve stage acts as a voltage amplifier, with the second stage forming part of the gain control element. The gain control is performed by our own unique transconductance stage which avoids the use of VCAs - thus improving transparency and minimising distortion, which is virtually constant at 0.05% over the full bandwidth. The frequency response of the C-1 is virtually flat between 20Hz and 40kHz, and measured between -3dB points, the C-1's bandwidth is a staggering 5Hz to 70kHz! ● 2 channels of soft knee, variable ratio compression ● Balanced mic and line level inputs ● Balanced line outputs, switchable for -10dB or +4dB operation ● Unbalanced jack I/O connections ● Stereo front panel auxiliary inputs with gain control and sensitivity switch (for guitar or keyboards etc.) ● Sidechain insert points for frequency conscious compression ● 48v phantom power ● 90Hz high pass filter switch (12dB / octave). Applies to all inputs ● Continuously variable Input Gain, Threshold, Attack / Release times, Compression Ratio and Gain Make Up ● Program dependent compression characteristic- attack and release times automatically adjust in response to program material ● 'Stereo Link' mode - gangs Threshold, Attack, Release and Ratio controls for processing stereo signal sources ● Illuminated VU meters allow monitoring of either output level or gain reduction ● Bypass switch with LED ● Frequency response 20Hz to 40kHz +0 / -1dB SPECIFICATIONS Mic Input: Impedance: > 10k. Gain range: +16 to +60dB. Input noise (EIN): - 126 dBu (22Hz-22kHz). Max input level: +10dBu. Balanced XLR connector. Line Input: (Balanced) Impedance: > 5k. Gain range: -10dB to +35dB. Max input level: +30dBu. XLR connector. (Unbalanced) Impedance: > 5k. Gain range: -10dB to +35dB. Max input level: +24dBu. Jack connector. Auxiliary input: Two unbalanced jack connectors for stereo operation, or Input A may be used to drive both channels. Max input level: +10dBu. Switchable sensitivity for guitar or keyboards. Output: Balanced output impedance: < 10. Max level: +22dBu into 600. Unbalanced output impedance: 47. Max level: +20dBu into 10k. Sidechain insert point: stereo jack, tip=send, ring=return. Nominal level - 2dBu. Output impedance: 47, Return input impedance: 10k. Compressor Functions (all continuously variable):- Threshold: -20dBu to +20dBu. Attack: 0.5mS to 50mS. Release: 40mS to 4S. Ratio: 1:1.5 to 1:30. Gain Make Up: 0dB to +20dB. Frequency response: 20Hz to 40kHz +0 / -1dB. Distortion: 0.05% (10Hz-40kHz). Dynamic Range: 100dB. Power supply: 110-120v or 220-240v AC. Power consumption: 30VA typical. Dimensions: 483 x 205 x 88mm (19" 2U). Weight: 5kg Shipping Weight: 6kg.