| Model |
PT-CW230 |
PT-CX200 |
| Power supply |
100 - 240 V AC, 50/60 Hz |
| Power consumption |
350 W (0.45 W when STANDBY MODE set to ECO,*1
11.0 W when STANDBY MODE set to NETWORK.) |
| DLP™ chip |
Panel size |
16.5 mm (0.65 inches) diagonal
(16:10 aspect ratio) |
14 mm (0.55 inches) diagonal
(4:3 aspect ratio) |
| Display method |
DLP™ chip x 1 DLP™ system |
| Pixels |
1,024,000 (1,280 x 800) pixels |
786,432 (1,024 x 768) pixels |
| Lens |
Fixed (0.19:1 throw ratio),
manual focus F = 2.5, f = 4.83 mm |
Fixed (0.24:1 throw ratio),
manual focus F = 2.5, f = 4.83 mm |
| Lamp |
275 W UHM lamp (The lamp replacement cycle is 3,000 hours*2) |
| Screen size (diagonal) |
1.52-2.79 m (60-110 inches)
(16:10 aspect ratio) |
1.40-2.29 m (55-90 inch)
(4:3 aspect ratio) |
| Color reproducibility |
Full color (16,777,216 colors) |
| Brightness*3 |
2,500 lm (lamp power: Normal) |
2,000 lm (lamp power: Normal) |
| Center-to-corner uniformity*3 |
80% |
| Contrast*3 |
2,000:1 (full on/off, lamp power: Normal) |
| Resolution |
1,280 x 800 pixels
(Input signals that exceed this resolution
will be converted to 1,280 x 800 pixels.) |
1,024 x 768 pixels
(Input signals that exceed this resolution
will be converted to 1,024 x 768 pixels.) |
Scanning
frequency |
HDMI |
(Horizontal) 15-93 kHz; (Vertical) 50-120 Hz; (Dot clock) 150 MHz or lower |
| RGB (analog) |
(Horizontal) 15-93 kHz; (Vertical) 50-120 Hz; (Dot clock) 150 MHz or lower
(Signals exceeding the dot clock rate of 150 MHz are downsampled.) |
| Keystone correction range |
Vertical: ±5° |
| Installation |
Ceiling/floor, front/rear (Menu setting) |
| Built-in speaker |
3.7 cm round shape x 1, output power 10 W (monaural) |
| Terminals |
HDMI IN |
HDMI 19-pin x 1(compatible with HDCP)
Audio signal: linear PCM (sampling frequencies: 48 kHz, 44.1 kHz, 32 kHz) |
| COMPUTER IN 1 |
D-sub HD 15-pin (female) |
| COMPUTER IN 2 / MONITOR OUT |
D-sub HD 15-pin (female) x 1 (RGB x 1) (input/output selectable using on-screen Menu)
(When Monitor Out is selected, the COMPUTER IN 1 signal is output.) |
| VIDEO IN |
RCA pin x 1 |
| S-VIDEO IN |
Mini DIN 4-pin x 1 |
| COMPUTER 1 AUDIO IN |
M3 x 1 (L-R x 1) |
| COMPUTER 2 AUDIO IN |
M3 x 1 (L-R x 1) |
| AUDIO IN |
RCA pin x 2 (L/R x 1) for VIDEO/S-VIDEO input |
| AUDIO OUT |
M3 x 1 (L-R x 1) for output (variable) |
| SERIAL IN |
D-sub 9-pin (female) x 1 for external control (RS-232C compliant) |
| LAN |
RJ-45 x 1 (for network connection, 100BASE-TX/10BASE-T,
compliant with PJLink™ (class 1)) |
| 3D SYNC OUT |
Mini DIN 3-pin x 1 (for 3D transmitter connection) |
| Power cord length |
3.0 m (9'10") |
| Cabinet materials |
Molded plastic |
| Dimensions (W x H x D) |
321 x 178 x 386 mm (12-5/8" x 7" x 15-3/16")
(with legs at shortest position) |
| Weight |
Approximately 6.2 kg (13.7 lbs)*4 |
| Noise level |
36 dB (Lamp power: Normal); 28 dB (Lamp power: Eco) |
| Operating temperature |
0°C-40°C [32°F-104°F] (Less than 1,000 m [3,281 ft] above sea level)
0°C-30°C [32°F-86°F] (between 1,000 and 2,700 m [3,281 ft and 8,858 ft] above sea level) |
| Operating humidity |
20%-80% (no condensation) |
| Supplied accessories |
Power cord x 1( x 2 for PT-CW230EA, PT-CX200EA), power cord cover x 1,
wireless remote control unit x 1, batteries (AAA/R03/LR03 type x 2),
computer cable (1.8 m, for VGA) x 1 |
