Zestaw:

Sansui BA-2000 + CA-2000

Sansui BA-2000

Specifications:

DIN output power per channel: 210 watts into 4 ohms, 145 watts into 8 ohms
THD at 1 kHz: 0.005%
Intermodulation: 0.005%
Power bandwidth at 1% THD: 10 - 60000 Hz into 4 ohms, 10 - 75000 Hz at 8 ohms
Input sensitivity/impedance: 1000 mV/50 kohms (1 kHz)
SNR: over 115 dB
Frequency response (1 W output): 5 Hz ~ 100 kHz + 0 -1 dB
Outputs: Speaker: 1 x pair (4 - 16 ohms), terminals
Electronic overload protection circuit
Power consumption: 245 watts
Dimensions: 460 x 160 x 375 mm
Weight: 18.3 kilograms
 

Sansui CA-2000

Specifications:

Output voltage (nominal) preamp output: 1 V
Tape recording: (pin/DIN): 150 mV/30 mV
Maximum output voltage (1 kHz) 12 V (0.1% THD or less)
THD (Aux): 0.03% below
Intermodulation distortion: (Aux, 70 Hz: 7 kHz = 4: 1, SMPTE) 0.03% below
Frequency (nominal): 10 Hz ~ 8 0kHz 0.5 - 1 dB
Phono equalization: RIAA (20 Hz ~ 20 kHz): ± 0.2 dB
Channel separation (rated power, 1 kHz): 60 dB or more
Noise ratio (IHF, a network, short circuit) Phono 1: 75 dB or more, Aux, Tape-Play: 90 dB or more
Input Sensitivity/Impedance (nominal power, 1 kHz) Phono 1: 2 mV, 4 mV, 8 mV/30 kohms, 50 kohms, 100 kohms, Phono 2: 2 kohms mV/50, Aux, Tuner, Tape Play: 150 mV/50 kohms
Tone control: Bass: ± 10 dB (30 Hz), Middle: ± 5 dB (1.5 kHz), Treble: ± 10 dB (20 kHz)
Dimensions: 460 x 176 x 345 mm
Weight: 9.9 kilograms

Stan - wizualny: patrz sekcja zdjęć;

     - techniczny: Sprawny.

ZACHĘCAM DO OBEJRZENIA MOICH INNYCH AUKCJI.

ZDJĘCIA [ REAL PHOTO ]