| Screen Size: |
33-300 inches, 16:10 aspect ratio |
| Optical Axis Shift: |
Vertical: ±51% from center of screen (manual),
horizontal: ±27% from center of screen (manual) |
| Lens: |
Manual (2× zoom), manual focus F 1.7-2.6, f 24.0-47.2 mm |
| Power Supply: |
100-240 V AC, 3.9 - 1.4 A, 50/60 Hz |
| Power Consumption: |
300 W
(0.3 W at 100-120 V AC, 0.4 W at 220-240 V AC when standby mode set to eco,*1 9 W when standby mode set to normal, 20 W when standby mode set to normal and audio monitor out.) |
| Panel Size: |
0.74" diagonal (16:9 aspect ratio) |
| Display Method: |
Transparent LCD panel (x 3, R/G/B) |
| Pixels: |
1,024,000 (1,280 × 800) × 3, total of 3,072,000 pixels |
| Center-to-corner uniformity: |
80% |
| RGB: |
G: 0.7 Vp-p (1.0 Vp-p for sync on G), 75 ohms;
B, R: 0.7 Vp-p, 75 ohms;
HD/VD, SYNC: high impedance, TTL (positive/negative)
NOTE: SYNC/HD and VD terminals do not accept tri-level sync signals. |
| Keystone correction range: |
Vertical: ±30° |
| Installation: |
Front/rear, ceiling/desk (menu selection) |
| Power cord length: |
2 m (6'7) |
| Dimensions (W X H X D): |
430 mm × 125.5 mm*4 × 323 mm
(16-15/16 × 4-15/16*4 × 12-23/32 inches) (including the lens) |
| Weight 1: |
Approximately 6.0 kg (13.2 lbs) |
| Operating temperature 2: |
0°-40°C (32°-104°F) |
| Operating humidity: |
20%-80% (no condensation) |
| Supplied accessories: |
Power cord with security lock(×1)
Wireless remote control unit(×1)
Batteries for remote control (AA/R6/LR6 type×2)
Software CD-ROM (Logo Transfer Software,Multi Projector Monitoring
and Control Software V2.5, Wireless Manager ME 5.5)(×1) |
| Throw Ratio: |
1.34-2.68:1 |
| Colors: |
Full color (16,777,216 colors) |
| Built-in speakers: |
4 cm (1-9/16 inches) (round) × 1 |
| LAN: |
RJ-45 for network connection, 10Base-T/100Base-TX, compliant with PJLink TM |
| S-VIDEO In: |
Mini DIN 4-pin x 1, Y: 1.0 Vp-p, C: 0.286 V [p-p], 75 ohms |
| VIDEO In: |
RCA pin × 1, 1.0 Vp-p, 75 ohms |
| SERIAL IN: |
D-sub 9-pin (female) x 1 (for external control, RS-232C compliant) |
| YPBPR (YCBCR): |
480i (525i): fH 15.75 kHz; fV 60 Hz,
576i (625i): fH 15.63 kHz; fV 50 Hz,
480p (525p): fH 31.50 kHz; fV 60 Hz,
576p (625p): fH 31.25 kHz; fV 50 Hz,
720 (750)/60p: fH 45.00 kHz; fV 60 Hz,
720 (750)/50p: fH 37.50 kHz; fV 50 Hz, |
| YPBPR (YCBCR) continued:: |
1080 (1125)/60i: fH 33.75 kHz; fV 60 Hz,
1080 (1125)/50i: fH 28.13 kHz; fV 50 Hz,
1080 (1125)/24p: fH 27.00 kHz; fV 24 Hz,
1080 (1125)/60p: fH 67.50 kHz; fV 60 Hz,
1080 (1125)/50p: fH 56.25 kHz; fV 50 Hz |
| Terminals HDMI IN: |
HDMI 19-pin × 1, Deep Color, HDCP compatible
480p (525p), 576p (625p), 720 (750)/60p, 720 (750)/50p, 1080 (1125)/60i, 1080 (1125)/50i, 1080 (1125)/24p, 1080 (1125)/60p, 1080 (1125)/50p |
| Terminals HDMI IN continued:: |
VGA (640 × 480)-WSXGA+ (1,680 × 1,050), compatible with noninterlaced signals only, dot clock: 25.2 MHz-146.25 MHz
Audio signal: linear PCM (sampling frequencies: 48 kHz, 44.1 kHz, 32 kHz) |
| Pixel configuration: |
Stripe |
| HDMI/DVI/D: |
fH: 27.0 kHz-68.7 kHz, fV: 24 .0 Hz-85.0 Hz,
dot clock: 25.2 MHz-148.5 MHz |
| WIRELESS MODULE: |
Connector for optional wireless module ET-WM200U/WM200E × 1 |
| Lamp: |
250 W UHM lamp |
| Brightness 3: |
3,500 lumens |
| Resolution: |
1,280 x 800 pixels (Input signals that exceed this resolution will be converted to 1,280 x 800 pixels. |
| Contrast: |
600:1 (full on/full off) |
| DVI-I (analog)/RGB: |
fH: 15 .6 kHz-91.1 kHz, fV: 24 .0 Hz-85.1 Hz,
dot clock: 162 MHz or lower |
| Video/S-Video: |
fH: 15.75 kHz, fV: 60 Hz [NTSC/NTSC4.43/PAL-M/PAL60]
fH: 15.63 kHz, fV: 50 Hz [PAL/PAL-N/SECAM] |
| Output power: |
5.0 W (monaural) |
| DVI-I IN: |
DVI-I 29-pin × 1 |
| Digital: |
DVI 1.0 compliant, compatible with HDCP, compatible with single link only
480p (525p), 576p (625p), 720 (750)/60p, 720 (750)/50p, 1080 (1125)/60i, 1080 (1125)/50i, 1080 (1125)/24p, 1080 (1125)/60p, 1080 (1125)/50p |
| Digital continued:: |
VGA (640 × 480) -WSXGA+ (1,680 × 1,050), compatible with noninterlaced signals only, dot clock: 25.2 MHz-146.25 MHz |
| Y, PB (CB), PR (CR): |
Y: 1.0 Vp-p (including sync signal);
PB (CB), PR (CR): 0.7 Vp-p, 75 ohms |
| COMPUTER (RGB) IN: |
D-sub HD 15-pin (female) × 1 |
| AUDIO IN 1: |
M3 × 1 (L, R × 1), input impedance: 22 kilohms or more |
| AUDIO IN 2: |
M3 × 1 (L, R × 1), 0.5 Vrms, input impedance: 22 kilohms or more |
| AUDIO IN 3: |
RCA × 2 (L, R × 1), 0.5 Vrms, input impedance: 22 kilohms or more |
| AUDIO OUT: |
M3 × 1 (L, R × 1) (monitor out: 0-2.0 Vrms, variable) |
| Cabinet materials: |
Molded plastic (PC + ABS) |
| Operation noise: |
33 dB (lamp mode: NORMAL), 29 dB (lamp mode: ECO) |
| Remote Control Unit Power Supply: |
3 V DC (R6/LR6/AA type battery × 2) |
| Remote Control Unit Operation Range: |
Approximately 15 m (49 ft 3 in) when operated from directly in front of the signal receptor |
| Remote Control Unit Dimensions (W × H × D): |
48 × 163 × 24.5 mm (1-13/32" × 6-5/8" × 31/32") |
| Remote Control Unit Weight: |
Approx. 117 g (4.1 oz) (including batteries) |
| Wireless Manager ME 5.5 system requirements: |
To use network functions, a PC is required that meets the conditions given below. |
| OS: |
Microsoft®
Windows® XP: Professional 32-bit, Home Edition 32-bit, Tablet PC Edition 2005 32-bit
Windows Vista®: Ultimate 32-bit/64-bit, Business 32-bit/64-bit, Home Premium 32-bit/64-bit, Home Basic 32-bit/64-bit |
| OS continued:: |
Windows® 7: Ultimate 32-bit/64-bit, Professional 32-bit/64-bit, Home Premium 32-bit/64-bit
Apple Mac OS X: v10.4, v10.5, v10.6 |
| Web browser: |
Windows®: Internet Explorer 6.0/7.0/8.0
Mac OS: Safari 2.0/3.0/4.0 |
| CPU: |
Windows®: 1 GHz or higher Intel® Pentium® III or higher, or other compatible processor
Mac OS X: 1 GHz or higher PowerPC G4, or 1.8 GHz or higher Intel® Core TM processor |
| Memory: |
256 MB or more (512 MB or higher is recommended for Mac OS X) |
| Free hard disk space: |
60 MB or more |
| CD-ROM drive: |
CD-ROM drive or DVD drive (required for installation) |
|
|
|
|
|
