|
|
MBD-PDSM4-O |
- PDSM4 (Standard Retail Pack)
|
MBD-PDSM4-B |
|
|
|
Form Factor |
|
Dimensions |
- 12" x 9.6", (30.5cm x 24.4 cm)
|
|
|
CPU |
- Single LGA775 ZIF Socket
- Supports an Intel® Pentium® D (Smithfield Dual Core) processor
- Supports an Intel® Pentium® Extreme Edition processor
- Supports an Intel® Pentium® 4 (Prescott) processor
- Supports an Intel® Pentium® 4 Extreme Edition processor
- Supports an Intel® Celeron® D processor with 256KB L2 Cache
- Hyper-Threading (HT) capable
- 2MB / 1MB L2 Cache
- Will not support E2000 processors
|
System Bus |
- 1066 / 800 / 533 MHz system bus
|
|
|
Memory Capacity |
- Four 240-pin DIMM sockets
- Supports up to 8 GB of unbuffered, ECC / non-ECC DDR2 667/533/400MHz memory (Single / Dual Channel)
|
Memory Type |
- DDR2 667/533/400MHz unbuffered, ECC / non-ECC SDRAM, 240-pin gold-plated DIMMs
|
DIMM Sizes |
- 256 MB, 512 MB, 1 GB, 2GB*
|
Memory Voltage |
|
|
|
Chipset |
- Intel E7230 (Mukilteo) chipset
- ICH7R + PXH + Intel® 82573V
|
Serial ATA |
- Intel® ICH7R SATA2 (3 Gbps) controller built-in
- Intel:
RAID 0, 1, 5, 10 support (Windows Only)
- Adaptec:
RAID 0 (Two, three, four drives only) RAID 1 (Two hard drives only)
|
SCSI |
- Adaptec AIC-7901
- HostRAID 0, 1, 10 Supported
|
SCSI ZCR |
- Support for Zero-Channel RAID
- Optional: (Card NOT included)
|
IPMI |
- 2U, 3U, 4U support for Intelligent Platform Management Interface v.2.0, Low Profile (Optional: AOC-LPIPMI-LANG)
- RMM (Remote Management Module)
- (Card not included)
- 3rd LAN Optional
|
Network Controllers |
- 1x Intel® 82573V Gigabit PCI-Express Ethernet
- 1x Intel® 82573L Gigabit PCI-Express Ethernet
- Supports 10BASE-T, 100BASE-T, 1000BASE-T, RJ45 output
|
VGA |
- On-board ATI Rage XL (8MB) graphics
|
Super I/O |
|
Clock Generator |
|
|
|
Serial ATA |
- Four Serial ATA ports (3 Gbps performance)
- Four SATA hard drives supported
|
SCSI |
- U320 Single Channel SCSI
- Adaptec AIC-7901
|
IDE |
- One EIDE channel supports up to two UDMA IDE devices
- Supports UDMA Mode 5, PIO Mode 4, and ATA/100
|
Floppy |
- 1 Floppy controller; 1.44 MB
|
LAN |
|
USB |
- 6x USB 2.0 compliant / 1.1 compatible
- 2 rear ports, 4 internal headers
- 2 in front (FUCI), 2 in rear
|
VGA |
|
Keyboard / Mouse |
- PS/2 keyboard and mouse ports
|
Serial Ports |
- 1x Fast UART 16550 serial port
- 1x header
|
Parallel Port |
- 1x ECP / EEP Parallel Header
|
|
|
|
|
2U |
|
Tower / 4U Rackmount |
|
Important Note |
- For a general system, a 350W (minimum) ATX12V power supply [8-pin +12V AND 24-pin is recommended to assure system stability].
|
|
|
PCI-Express |
|
PCI - X |
- 2x 64-bit 133MHz PCI-X (3.3V) slots
- 2x 64-bit 100MHz PCI-X (3.3V) slots
|
|
|
BIOS Type |
- 8Mb Flash EEPROM with Phoenix BIOS®
|
BIOS Features |
- Plug and Play (PnP)
- DMI 2.3 support
- PCI 2.2
- ACPI 1.0
- Hardware BIOS Virus protection
- SMBIOS 2.3
- USB Keyboard support
- PCI-X - 1.0
|
|
|
Software |
- Optional IPMI (Intelligent Platform Management Interface) 2.0
- SuperDoctor® III
- Watch Dog
- NMI
|
Power Configurations |
- ACPI/APM Power Management
- Main Switch Override Mechanism
- Wake-On-Ring (WOR) header
- Wake-On-LAN (WOL) header
- Keyboard Wakeup from Soft-Off
- CPU Fan auto-off in sleep mode
- Power-on mode control for AC power loss recovery
- Internal/External modem remote ring-on
|
|
|
Voltage |
- Monitors for CPU Cores (+1.8V, +3.3V, +5, ±12V, +5V Standby)
- CPU Core 4-Phase-switching voltage regulator with auto-sense from 0.8375V-1.6000V
- Adjustable CPU clock frequency ratio settings (via BIOS)
|
FAN |
- Total of five 4-pin fan headers
- 5x fans with tachometer monitoring
- Status monitor with firmware / software speed control
- Status monitor for on/off control
- Support 3-pin fans (with speed control)
- Low noise fan speed control
- Pulse Width Modulated (PWM) fan connector
|
Temperature |
- Monitoring for CPU and chassis environment
- CPU Thermal Trip support
- Thermal Monitor (TM2) Support
|
LED |
- CPU / System Overheat LED
- +5V standby alert LED
- Suspend-state indicator LED
|
Other Features |
- Chassis intrusion detection
- Chassis intrusion header
|
|
RoHS
|
|
Environmental Spec. |
- Operating Temperature: 10°to 35°C (50°to 95°F)
- Non-operating Temperature: -40°to 70°C (-40°to 158°F)
- Operating Relative Humidity: 8% to 90% (non-condensing)
- Non-operating Relative Humidity: 5 to 95% (non-condensing)
|
|
|
FCC |
- Passed to meet FCC standard requirement
|
|