|
!!! NOWA PŁYTA GŁÓWNA !!!
TYAN Thunder K8SRE S2891
Specifications
Processor
• Dual µPGA 940-pin ZIF sockets
• Two onboard 4-phase VRM
• Supports up to two AMD Opteron™ 200 processors
• Three HyperTransport™ links support up to
8.0GB/s data transfer rate each link
• 144-bit DDR interface (128-bit data + 16 bit ECC)
• Scalable 32bit & 64bit computing
• Secure computing with Nx register support
• Supports Single and Dual Core processors
Chipset
• AMD-8131™ HyperTransport™ PCI-X Tunnel
• NVIDIA nForce™ Prof. 2200 (CrushK8-04 Pro)
• Winbond™ W83627HF Super I/O ASIC
• Analog Devices ADT7463 Hardware Monitoring IC
Memory
• 128-bit dual channel (interleaved) memory bus
• Total eight DDR DIMM sockets (four per CPU)
• Supports up to 32GB of Registered DDR
• Supports Single/Dual/Quad Rank mem. modules
• Supports DDR 266/333/400 memory
• Supports ECC with CHIPKILL Technology
Expansion Slots
• One PCI Express x16 slot with 1U riser support:
- Other riser solutions in development
• One Tyan TARO SO-DIMM 100MHz (PCI-X B)
• One PCI-X 100MHz slot (Bridge B)
• Total of three usable slots
* NOTE: Use of PCIe x16 riser is necessary for installation of PCIe x16 add-on cards! See this matrix for details: Tyan Riser Card Matrix
Integrated I/O
• One floppy connector
• One parallel port header and two serial
(one connector, one header)
• Six USB 2.0 ports
(two rear connector & four front panel headers)
• One 15-pin VGA connector
• PS/2 mouse and keyboard connectors
System Management
• Total of ten 3-pin fan headers with PWM support
• Seven fan headers with tachometer
(four from ADT7463 three from W83627HF)
• One 2-pin Chassis Intrusion header
• Temperature, voltage and fan monitoring
• Port 80h LED 7-segment display
Integrated LAN Controller
• One Broadcom BCM5704 dual port GbE LAN
- Two RJ-45 LAN connectors with LEDs
- Connected to PCI-X Bridge A (133MHz)
• Two Front Panel LED headers
Integrated PCI Graphics
• ATI® RAGE™ XL 8MB PCI graphics controller
Integrated Enhanced IDE Controller
• Two IDE ports for up to four EIDE devices
• Supports ATA-133 IDE drives & ATAPI devices
Integrated SATA Controller
• Two integrated dual port SATA-II controllers
• Four SATA-II ports support up to four drives
• Supports 3.0Gb/s per port; RAID 0, 1, 0 + 1
• NvRAID™ v2.0 support
Intelligent Platform Management Interface Header
• TYAN Server Management Daughter card
(optional) supports features listed below via
IPMI header
• Baseboard Management Controller (BMC)
• Tailored for IPMI
• Supports KCS and BT styles
• Flexible Windows or Linux Management Solution
• Supports RMCP and SNMP protocols
• Supports ASF standard and EMP
• I2C serial multi-master controllers and UARTs
• Build-in IPMB connector
• Remote power on/off and reset support
(IPMI-over-LAN)
BIOS
• Phoenix BIOS on 8Mbit LPC Flash ROM
• Supports ACPI 2.0 and SRAT
• Supports PXE via Ethernet, USB device boot
• SMBIOS 2.3.1, BBS 1.1 compliant
• Headless Operation via serial console redirect
• 48-bit LBA Support
Form Factor
• Extended ATX (12"x13"; 304.8x330.2mm)
• SSI 3.0/3.51 (24pin + 8pin) power connectors
• Serial (one) and VGA (one) connectors
• Stacked USB 2.0 (two) connectors
• Stacked PS/2 keyboard and mouse connectors
• Two RJ-45 LAN connectors with LEDs
= 100% SPRAWNY =
= WYSTAWIAMY FAKTURY VAT =
= GWARANCJA 36 MIESIĘCY =
KUPUJESZ W SKLEPIE - OD SUPER SPRZEDAWCY!!!
SPRAWDŹ KOMENTARZE
WYSYŁKA UPS = DOSTAWA W 24H
Wygląd jak na zdjęciu!!!
ZAPRASZAM DO LICYTACJI
|
|
