Rewelacyjny Meridian G55 - stan idealny bez śladów użytkowania. Bardzo mało użytkowany.

Cena nowego to ponad 25.000 zł !!!

Outline Specifications Power Output 5 channels at 100W into 8Ω, or 2 channels at >300W into 8Ω (bridge mode) Distortion Less than 0.01% input to output Signal/Noise Better than –100dB Inputs Balanced on XLR-3F connectors and unbalanced on phono Outputs 2 output sets per channel, terminal posts Construction 25 pairs of 15amp output devices and 68,000μF of audiophile-grade PSU smoothing capacitors. Ultra low impedance error-corrected output stage. DC coupled, with no capacitors in the signal path. Soft start and thermal management in main assembly. Optimised magnetic design based on DSP8000. Meridian black or silver finish in metal & glass Dimensions Width: 440mm (17.32in); Depth: 350mm (13.78in) plus connectors; Height: 132mm (5.20in) Rack Mounting Kit available from Meridian authorized dealers Weight 20 kg (44 lbs) Controls Rear-panel power switch; per-channel switches for balanced or single-ended input; Bridge/Stereo mode switches on channels 1 and 5 Trigger Wide voltage-range (5–30V, AC/DC) trigger input for remote standby/on switching Display Power/Fault indicator and per-channel operation LEDs Power Versions: 100, 110, 115, 220, 230, 240 Vac, 50/60Hz. Standby 31VA, Idle 58VA, 5 channels driven 748VA The Meridian G55 is a five-channel unit, and delivers a solid 100W continuous mean power per channel into 8Ω. Ideal for home theatre and multichannel music applications, G55 is delicate enough for pinpoint Trifield imaging yet delivers all the brute force you need for action movies. Special attention has been paid to ensuring that the amplifiers can deliver the power that’s required at any given moment. Massive twin low-noise toroidal power transformers provide power to no less than 25 selected pairs of output devices, carefully temperature-controlled for optimum operating characteristics and efficiency. The result is a clear, open sound with detail as well as punch where it’s required – at any volume level from a string quartet at midnight to Metallica at high noon. The amplifier modules feature a symmetrical design with fully electronically-balanced inputs. Both balanced and unbalanced inputs are provided, but in fact the unbalanced inputs are converted to balanced before they enter the amplifier itself. The discrete active input components are thermally and electrically matched in pairs. The amps feature active bias control throughout, with thermal sensing carefully managing temperature and current flow at different volume levels. Fully DC-coupled, the signal path contains no capacitors, while those in the power supplies are audiophile grade components. The amplifiers are of a unique low-feedback design for minimum transient and interface intermodulation distortion, offering superb clarity and transparency right across the audible range, with an output impedance that is close to zero and suitable for virtually any high-quality passive loudspeaker system. A trigger input allows the amplifier to be activated on a signal from your preamp, such as the 861 or G65. Triggers and other control signals are optically isolated from the amplifier itself. When in stand-by mode, a standing voltage is maintained on the power rails and supply components. As a result, you do not have to wait for half an hour after switching on for optimum performance to be achieved: it is there immediately. Two sets of outputs are provided per channel for bi-wiring, etc, on sturdy binding posts colour-coded for easy reference and capable of handling large-diameter high-quality loudspeaker cables. The output terminals are connected to the amplifiers by Van den Hul silver-strand cable to avoid signal losses. The outer pairs of channels can be operated in bridge mode by actuating a rear-panel rocker switch on the channel 1 and/or channel 5 modules, in which case the outer channel input of the pair becomes the bridged input and the upper output terminals are linked, power being derived from the lower terminal pairs. The amplifiers have electronic protection, reset by power-cycling, and include full DC and thermal protection. A front-panel indicator shows when the amplifier is in standby. When the unit is activated, an LED illuminates for each channel. In the event of thermal overload, the main indicator goes red and the channel lights go out, showing that the unit is off-line. A pushbutton on the front panel can be used to take the unit in and out of standby, while flexible 5–30V AC/DC trigger capability is also provided to fully integrate power cycling into the overall system.

Szczerze polecam