Pamięć RAM DDR2 8500 (1066 MHz) Kingston HyperX dual chanel (2x2GB). KHX8500D2K2/4G.
Gwarancja rozruchowa.
Najchętniej odbiór osobisty (Warszawa - Mokotów), w przypadku przesyłki Pocztą Polską lub InPostem nie biorę odpowiedzialności za ew. uszkodzenia w transporcie.
Specyfikacja producenta (http://www.kingston.com/us/memory/search/Default.aspx?DisPartId=KHX8500D2K2/4G):
DESCRIPTION
Kingston’s KHX8500D2K2/4G is a kit of two 256M x 64-bit
2GB (2048MB) DDR2-1066 CL5 SDRAM (Synchronous
DRAM) memory modules, based on sixteen 128M x 8-bit
DDR2 FBGA components per module. Total kit capacity is
4GB (4096MB). Each module pair has been tested to run at
DDR2-1066MHz at a latency timing of 5-5-5-15 at 2.2V. The
SPD is programmed to JEDEC standard latency 800Mhz
timing of 5-5-5-18 at 1.8V. Each 240-pin DIMM uses gold
contact fingers and requires +1.8V. The electrical and mechanical
specifications are as follows:
SPECIFICATIONS
Clock Cycle Time (tCK) CL=5 2.5ns (min.) / 8ns (max.)
Row Cycle Time (tRC) 51.5ns (min.)
Refresh to Active/Refresh 127.5ns
Command Time (tRFC)
Row Active Time (tRAS) 39ns (min.) / 70,000ns (max.)
Single Power Supply of +1.8V (+/- .1V)
Power 1.584 W (operating per module)
UL Rating 94 V - 0
Operating Temperature 0° C to 55° C
Storage Temperature -55° C to +125° C
FEATURES
• Power supply : Vdd: 1.8V ± 0.1V, Vddq: 1.8V ± 0.1V
• Double-data-rate architecture; two data transfers per
clock cycle
• Bidirectional data strobe(DQS)
• Differential clock inputs(CK and CK)
• DLL aligns DQ and DQS transition with CK transition
• Programmable Read latency 5 (clock)
• Burst Length: 4, 8 (Interleave/nibble sequential)
• Programmable Burst type (sequential & interleave)
• Timing Reference: 5-5-5-18 at +1.8V / 5-5-5-15 at +2.2V
• Edge aligned data output, center aligned data input
• Auto & Self refresh, 7.8us refresh interval (8K/64ms refresh)
• Serial presence detect with EEPROM
• High Performance Heat Spreader
• PCB : Height 1.180” (30.00mm), double sided component