Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000f 100 [zasłonięte] 051 Pre-fail Always - 0
3 Spin_Up_Time 0x0007 [zasłonięte] 100 015 Pre-fail Always - 5632
4 Start_Stop_Count 0x0032 [zasłonięte] 096 000 Old_age Always - 4067
5 Reallocated_Sector_Ct 0x0033 [zasłonięte] 253 010 Pre-fail Always - 0
7 Seek_Error_Rate 0x000f 253 [zasłonięte] 051 Pre-fail Always - 0
8 Seek_Time_Performance 0x0025 [zasłonięte] 253 015 Pre-fail Offline - 0
9 Power_On_Hours 0x0032 [zasłonięte] 100 000 Old_age Always - 6884
10 Spin_Retry_Count 0x0033 [zasłonięte] 253 051 Pre-fail Always - 0
11 Calibration_Retry_Count 0x0012 [zasłonięte] 253 000 Old_age Always - 0
12 Power_Cycle_Count 0x0032 [zasłonięte] 098 000 Old_age Always - 2805
187 Reported_Uncorrect 0x0032 [zasłonięte] 253 000 Old_age Always - 0
188 Command_Timeout 0x0032 [zasłonięte] 253 000 Old_age Always - 0
190 Airflow_Temperature_Cel 0x0022 [zasłonięte] 057 000 Old_age Always - 35
194 Temperature_Celsius 0x0022 [zasłonięte] 109 000 Old_age Always - 35
195 Hardware_ECC_Recovered 0x001a 100 [zasłonięte] 000 Old_age Always - 185[zasłonięte]808
196 Reallocated_Event_Count 0x0032 [zasłonięte] 253 000 Old_age Always - 0
197 Total_Pending_Sectors 0x0012 [zasłonięte] 253 000 Old_age Always - 0
198 Offline_Uncorrectable 0x0030 [zasłonięte] 253 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x003e 200 [zasłonięte] 000 Old_age Always - 0
200 Multi_Zone_Error_Rate 0x000a 253 [zasłonięte] 000 Old_age Always - 0
201 Soft_Read_Error_Rate 0x000a 100 [zasłonięte] 000 Old_age Always - 0
202 Data_Address_Mark_Errs 0x0032 [zasłonięte] 100 000 Old_age Always - 10

SMART Error Log Version: 1
No Errors Logged

SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Extended offline Completed without error 00% 6882 -
# 2 Extended offline Completed without error 00% 4456 -
# 3 Extended offline Interrupted (host reset) 90% 3851 -
# 4 Extended offline Completed without error 00% 3549 -

Note: selective self-test log revision number (0) not 1 implies that no selective self-test has ever been run
SMART Selective self-test log data structure revision number 0
Note: revision number not 1 implies that no selective self-test has ever been run
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.

Nie sprzedaję poza aukcją.