I sprzedaję kolejny dysk, ogólnie to jest sprawny, nie miałem z nim problemów. Aczkolwiek smart zgłasza w drugiej części logu jakieś błędy.

ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000f 100 100 051 Pre-fail Always - 0
3 Spin_Up_Time 0x0007 100 100 025 Pre-fail Always - 5952
4 Start_Stop_Count 0x0032 095 095 000 Old_age Always - 5667
5 Reallocated_Sector_Ct 0x0033 253 253 010 Pre-fail Always - 0
7 Seek_Error_Rate 0x000f 253 253 051 Pre-fail Always - 0
8 Seek_Time_Performance 0x0025 253 253 015 Pre-fail Offline - 0
9 Power_On_Hours 0x0032 100 100 000 Old_age Always - 12882
10 Spin_Retry_Count 0x0033 253 253 051 Pre-fail Always - 0
11 Calibration_Retry_Count 0x0012 253 002 000 Old_age Always - 0
12 Power_Cycle_Count 0x0032 097 097 000 Old_age Always - 3651
190 Airflow_Temperature_Cel 0x0022 103 070 000 Old_age Always - 45
194 Temperature_Celsius 0x0022 103 070 000 Old_age Always - 45
195 Hardware_ECC_Recovered 0x001a 100 100 000 Old_age Always - 69[zasłonięte]072
196 Reallocated_Event_Count 0x0032 253 253 000 Old_age Always - 0
197 Current_Pending_Sector 0x0012 253 253 000 Old_age Always - 0
198 Offline_Uncorrectable 0x0030 253 253 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0
200 Multi_Zone_Error_Rate 0x000a 253 100 000 Old_age Always - 0
201 Soft_Read_Error_Rate 0x000a 100 100 000 Old_age Always - 0
202 Data_Address_Mark_Errs 0x0032 100 100 000 Old_age Always - 15

SMART Error Log Version: 1
ATA Error Count: 13 (device log contains only the most recent five errors)
CR = Command Register [HEX]
FR = Features Register [HEX]
SC = Sector Count Register [HEX]
SN = Sector Number Register [HEX]
CL = Cylinder Low Register [HEX]
CH = Cylinder High Register [HEX]
DH = Device/Head Register [HEX]
DC = Device Command Register [HEX]
ER = Error register [HEX]
ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.

Error 13 occurred at disk power-on lifetime: 7391 hours (307 days + 23 hours)
When the command that caused the error occurred, the device was active or idle.

After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
84 51 20 d9 cf b7 ed Error: ICRC, ABRT 32 sectors at LBA = 0x0db7cfd9 = 230[zasłonięte]105

Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 20 d9 cf b7 ed 00 05:54:03.563 READ DMA
ca 00 0a d5 19 0c ef 00 05:54:03.500 WRITE DMA
ca 00 01 b9 de 7b ed 00 05:54:03.500 WRITE DMA
c8 00 10 49 cf b7 ed 00 05:54:03.500 READ DMA
ca 00 29 79 0e cc ed 00 05:54:03.438 WRITE DMA

Error 12 occurred at disk power-on lifetime: 7358 hours (306 days + 14 hours)
When the command that caused the error occurred, the device was active or idle.

After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 08 d9 75 f5 ed Error: UNC 8 sectors at LBA = 0x0df575d9 = 234[zasłonięte]297

Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 08 d9 75 f5 ed 00 00:01:14.625 READ DMA
ec 00 00 00 00 00 a0 00 00:01:14.625 IDENTIFY DEVICE
ef 03 45 00 00 00 a0 00 00:01:14.625 SET FEATURES [Set transfer mode]
ec 00 00 00 00 00 a0 00 00:01:14.625 IDENTIFY DEVICE

Error 11 occurred at disk power-on lifetime: 7358 hours (306 days + 14 hours)
When the command that caused the error occurred, the device was active or idle.

After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 08 d9 75 f5 ed Error: UNC 8 sectors at LBA = 0x0df575d9 = 234[zasłonięte]297

Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 08 d9 75 f5 ed 00 00:01:12.750 READ DMA
ec 00 00 00 00 00 a0 00 00:01:12.750 IDENTIFY DEVICE
ef 03 45 00 00 00 a0 00 00:01:12.750 SET FEATURES [Set transfer mode]
ec 00 00 00 00 00 a0 00 00:01:12.750 IDENTIFY DEVICE

Error 10 occurred at disk power-on lifetime: 7358 hours (306 days + 14 hours)
When the command that caused the error occurred, the device was active or idle.

After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 08 d9 75 f5 ed Error: UNC 8 sectors at LBA = 0x0df575d9 = 234[zasłonięte]297

Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 08 d9 75 f5 ed 00 00:01:10.875 READ DMA
ec 00 00 00 00 00 a0 00 00:01:10.875 IDENTIFY DEVICE
ef 03 45 00 00 00 a0 00 00:01:10.875 SET FEATURES [Set transfer mode]
ec 00 00 00 00 00 a0 00 00:01:10.875 IDENTIFY DEVICE

Error 9 occurred at disk power-on lifetime: 7358 hours (306 days + 14 hours)
When the command that caused the error occurred, the device was active or idle.

After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 08 d9 75 f5 ed Error: UNC 8 sectors at LBA = 0x0df575d9 = 234[zasłonięte]297

Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 08 d9 75 f5 ed 00 00:01:09.000 READ DMA
ec 00 00 00 00 00 a0 00 00:01:09.000 IDENTIFY DEVICE
ef 03 45 00 00 00 a0 00 00:01:09.000 SET FEATURES [Set transfer mode]
ec 00 00 00 00 00 a0 00 00:01:09.000 IDENTIFY DEVICE

SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Extended offline Completed without error 00% 12880 -
# 2 Extended offline Completed without error 00% 10739 -
# 3 Extended offline Completed without error 00% 9027 -
# 4 Extended offline Completed without error 00% 8845 -
# 5 Short offline Completed without error 00% 8836 -

Note: selective self-test log revision number (0) not 1 implies that no selective self-test has ever been run
SMART Selective self-test log data structure revision number 0
Note: revision number not 1 implies that no selective self-test has ever been run
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.

Nie sprzedaję poza aukcją.