• Channels: 12 proportional, 2 switched
  
  
• Compatible with FASSTest, FASST and S-FHSS protocols
  
  
• FASSTest telemetry – compatible with Futaba telemetry sensors (sold separately)
  
  
• Free user-updatable software
  
  
• 30-model memory
  
  
• 10-character user naming
  
  
• 10-character model naming
  
  
• Airplane, helicopter and glider programming
  
  
• Large, 1.75” x 3” backlit LCD screen with 128 x 64 resolution
  
  
• SensorTouch™ programming
  
  
• Compatible with secure digital memory cards for external storage of model setups and software updates (32MB-2GB or HC (High-Capacity) 4GB-32GB)
  
  
• Left and right assignable slider switches
  
  
• Two assignable rotary knobs
  
  
• Six assignable three-position switches
  
  
• One assignable momentary two-position switch
  
  
• One assignable two-position switch
  
  
• Comfortable rubber grips on the sides and back
  
  
• Wide top switch spacing
  
  
• Adjustable stick tension
  
  
• Dual ball bearing gimbals
  
  
• 4 vibration warning types
  
  
• Home/Exit; User Menu/Servo Monitor buttons
  
  
• Audio earphone jack (for telemetry alarms)
  
  
• 6V 1800mAh NiMH battery pack
  
  
• User stick calibration
  
  
• Trainer system
  
  
• Servo speed adjust
  
  
• 5 programmable mixes
  
  
• V-tail, Ailvator, winglet, motor mixing
  
  
• Trim mix
  
  
• Logic switch (condition switch only)
  
  
• Internal programmer for S.Bus servos
  
  
• User menu
  
  
• Servo monitor (neutral and moving tests)
  
  
• 2 count up/countdown timers
  
  
• Integral timer
  
  
• Model timer
  
  
• Quick model select

Futaba Reciver ( ODBIORNIK):

przy zakupie z radiem:  FUTABA R7008SB 

This is the Futaba R7008SB 2.4GHz FASSTest 8+ Channel High-Voltage Receiver

for the 18MZ Radio System.

FEATURES: Bi-directional communication with a FASSTest Futaba transmitter
using the S.Bus2 port
Multiple optional telemetry sensors may be connected to the S.Bus2
port and the data displayed on the transmitter
Includes both standard PWM output ports and S.Bus output ports
External voltage port, 0-70V DC
The External Voltage connector needed for this is:
FUTM5551 CA-RVIN-700 EX VLT CBL
One year limited warranty through Hobby Services beginning at date
of purchase.

INCLUDES: Futaba R7008SB 2.4GHz FASSTest Receiver with Instructions

SPECS:    Receiving Frequency: 2.4GHz FASSTest system
Power Requirement: 3.7 - 7.4V (voltage range 3.5 - 8.4V)
Current drain: 75mA
External voltage Port: 0 - 70V DC
Size: 0.98 x 1.9 x 0.56" (24.9 x 47.3 x 14.3mm)
Weight: 0.38oz (10.9g)
 

przy zakupie bez radia: FUTABA R6008HS

This is the Futaba R6008HS 2.4GHz FASST 8-Channel Receiver.

This receiver is switchable between regular and HS modes,
per the Link/Mode button.

**NOT compatible with the Futaba 6EX and 7C 2.4GHz System.**

FEATURES: 2048 resolution plus FASST benefits including Dual Antenna
Diversity and significantly reduced latency for lightning quick
response
High speed operation allows digital servos to update more rapidly
than analog servos (both are compatible with this receiver)
HS (High Speed) mode improves frame rate on channels 1-6 to only
7 milliseconds-compared to 14 milliseconds at normal mode
One year limited warranty

INCLUDES: Futaba R6008HS 2.4GHz FASST 8-Channel Receiver with instruction sheet

REQUIRES: Installing in model and connecting servos

SPECS:    Dimensions: 1.8 x 0.9 x 0.5" (45 x 22 x 13mm)
Weight: 0.48oz (13.5g)
Power Requirement: 4.8 or 6.0V battery or regulated output from ESC

COMMENTS: In HS mode, digital servos (including those in the BLS series) must
be used on channels 1-6. Those channels will also operate gyros and
brushless ESCs. Channels 7 and 8 continue at normal mode and accept
any servos.
BATERIE:
w zestawie:
2x TURNIGY
Turnigy nano-tech 6000mah 4S 25~50C Lipo

Capacity: 6000mAh
Voltage: 4S1P / 4 Cell / 14.8V
Discharge: 25C Constant / 50C Burst
Weight: 623g (including wire, plug & case)
Dimensions: 175x49x38mm
Balance Plug: JST-XH
Discharge Plug: HXT4mm
Advantages over traditional Lipoly batteries;
• Power density reaches 7.5 kw/kg.
• Less Voltage sag during high rate discharge, giving more power under load.
• Internal impedance can reach as low as 1.2mO compared to that of 3mO of a standard Lipoly.
• Greater thermal control, pack usually doesn’t exceed 60degC
• Swelling during heavy load doesn’t exceed 5%, compared to 15% of a normal Lipoly.
• Higher capacity during heavy discharge. More than 90% at 100% C rate.
• Fast charge capable, up to 15C on some batteries.
• Longer Cycle Life, almost double that of standard lipoly technology.
The nano-core technology in lithium ion batteries is the application of nanometer conductive additives. The nanometer conductive additives form ultra-strong electron-conducting networks in the electrodes which can increase electronic conductivity.
These additives create the ability for imbibition in the carrier liquid to supply more ion channels. This improves the ability of ion transmission and ion diffusion. Through improving electronic conductivity and ion transmission, the impedance is reduced and the polarization of high rate discharge decreases greatly.
 
1X BATERIA do OSWIETLENIA LED:
Turnigy nano-tech 1400mah 3S 40~80C Lipo

 
 
możliwość dokupienia ( przy zakupie drona cena 750zł za 2 zt.) baterii akrobacyjnych o niespotykanych do tej pory parametrach
Turnigy nano-tech A-SPEC G2 5000mah 4S 65~130C Lipo

Specs:
Capacity: 5000mAh
Voltage: 4S1P / 4 Cell / 14.8V
Discharge: 65C Constant / 130C Burst
Weight: 537g (including wire, plug & case)
Dimensions: 156x46x35mm
Balance Plug: JST-XH
Discharge Plug: 5.5mm Bullet Connector
Advantages over traditional Lipo batteries.
• Power density reaches 7.5 kw/kg.
• Less Voltage sag during high rate discharge, giving more power under load.
• Internal impedance can reach as low as 1.2mO compared to that of 3mO of a standard Lipoly.
• Greater thermal control, pack usually doesn't exceed 60degC
• Higher capacity during heavy discharge. More than 90% at 100% C rate.
• Fast charge capable, up to 15C on some batteries.
• Longer Cycle Life, almost double that of standard lipoly technology.
The nano-core technology in lithium ion batteries is the application of nanometer conductive additives. The nanometer conductive additives form ultra-strong electron-conducting networks in the electrodes which can increase electronic conductivity.
These additives create the ability for imbibition in the carrier liquid to supply more ion channels. This improves the ability of ion transmission and ion diffusion. Through improving electronic conductivity and ion transmission, the impedance is reduced and the polarization of high rate discharge decreases greatly.

• 7 different wing types
  
  
• 3 different tail types
  
  
• 2 different rudder types
  
  
• Flap setting menu
  
  
• Differential ailerons
  
  
• Aileron to camber flap mixing
  
  
• Aileron to brake flap mixing
  
  
• Aileron to rudder mixing
  
  
• Rudder to aileron mixing
  
  
• Rudder to elevator mixing
  
  
• Camber mixing
  
  
• Elevator to camber mixing
  
  
• Camber flap to elevator mixing
  
  
• Snap roll mixing
  
  
• Airbrake mixing
  
  
• V-Tail mixing
  
  
• Ailvator
  
  
• Winglet
  
  
• Motor mixing
  
  
• Fuel mixture mixing
  
  
• Gyro mixing
  
  
• Throttle curve (5-point)
  
  
• Pitch curve (5-point)
  
  
• Idle down

• 6 swash plate types
  
  
• Pitch/throttle curves (5-point)
  
  
• Throttle hold
  
  
• Swash mix
  
  
• Throttle mix
  
  
• Pitch to rudder mixing
  
  
• Fuel mixture
  
  
• Gyro (Flybarless support)
  
  
• Governor ([zasłonięte]700-35 rpm)
  
  
• Hover pitch
  
  
• Hover throttle
  
  
• High/low pitch
  
  
• Swash AFR
  
  
• Swash setting (mixing rate, linkage compensation, speed compensation)
  
  
• Swash ring (electronic)
  
  
• Throttle cut

• 11 different wing types
  
  
• 3 different tail types
  
  
• 2 different rudder types
  
  
• Flap setting menu
  
  
• Differential ailerons
  
  
• Aileron to camber flap mixing
  
  
• Aileron to brake flap mixing
  
  
• Aileron to rudder mixing
  
  
• Rudder to aileron mixing
  
  
• Rudder to elevator mixing
  
  
• Camber mixing
  
  
• Elevator to camber mixing
  
  
• Camber flap to elevator mixing
  
  
• Butterfly mixing
  
  
• Butterfly to elevator mixing