PŁYTA GŁÓWNA DFI LAN PARTY ULTRA B

PO WYMIANIE ELEKTROLITÓW

100% SPRAWNA

CPU
• AMD Athlon XP 266/333/400MHz FSB

• AMD Athlon 200/266MHz FSB

• AMD Duron 200/266MHz FSB
CPU Socket• Socket A

Chipset• nVIDIA nForce2 chipset
- nForce2 Ultra 400 - nForce2 MCP-T
Memory
• Supports dual channel memory interface

• Supports up to 3GB memory (unbuffered DIMM)

• Supports PC1600 (DDR200), PC2100 (DDR266), PC2700 (DDR333) and PC3200 (DDR400)
DDR SDRAM DIMM, 2.5V type
• Three 184-pin DDR SDRAM DIMM sockets
BIOS
• Award BIOS, Windows® 95/98/2000/ME/XP Plug and Play compatible

• Genie BIOS provides:
- CPU/DRAM/AGP overclocking - CPU/AGP/DRAM/Chipset overvoltage
• 4Mbit flash memory

• CMOS Reloaded
Power Management
• Supports ACPI STR (Suspend to RAM) function

• Wake-On-Events include:
- Wake-On-PS/2 Keyboard/Mouse - Wake-On-USB - Wake-On-Ring (external modem) - Wake-On-LAN - RTC timer to power-on the system
• AC power failure recovery
Hardware Monitor
• Monitors CPU/system temperature

• Monitors ±12V/5V/3.3V/VBAT(V)/5VSB(V) voltages

• Monitors CPU/chassis fan speed

• Read back capability that displays temperature, voltage and fan speed

• CPU Temperature Protection function monitors CPU temperature during system boot-up
Audio
• Realtek ALC650

• AC97 2.2 S/PDIF extension compliant codec

• Supports Microsoft® DirectSound/DirectSound 3D

• AC97 supported with full duplex, independent sample rate converter for
audio recording and playback
• S/PDIF-in/out interface

• 6-channel audio output
LAN
• nVIDIA nForce2 MCP-T and ICS1893 Phy
- Full duplex support at both 10 and 100 Mbps
• Realtek RTL8110S Gigabit LAN
- Full duplex support at 10, 100 and 1000 Mbps
IDE
• Supports ATA/33, ATA/66, ATA/100 and ATA/133 hard drives

• UDMA Modes 3, 4, 5 and 6 Enhanced IDE (data transfer rate up to 133MB/sec.)
Serial ATA with RAID
• Silicon Image Sil3114 PCI to Serial ATA controller

• Supports four SATA (Serial ATA) interfaces which are compliant with SATA 1.0
specification (1.5Gbps interface)
• Supports RAID 0 and RAID 1
IEEE 1394
• nVIDIA nForce2 MCP-T and Agere FW803 Phy chips

• Supports three 100/200/400 Mb/sec ports
AGP
• Supports AGP 8x up to 2132MB/sec. and AGP 4x up to 1066MB/sec. bandwidth
for 3D graphics applications
Rear Panel I/O Ports
• 1 PS/2 mouse port

• 1 PS/2 keyboard port

• 1 DB-9 serial port

• 1 DB-25 parallel port

• 4 USB 2.0/1.1 ports

• 2 RJ45 LAN ports

• 2 S/PDIF RCA jacks (S/PDIF-in and S/PDIF-out)

• 3 audio jacks: line-out, line-in and mic-in

• 2 audio jacks for center/bass and rear out
I/O Connectors
• 1 connector for 2 additional external USB 2.0/1.1 ports

• 3 connectors for 3 external IEEE 1394 ports

• 1 front audio connector for external line-out and mic-in jacks

• 2 internal audio connectors (AUX-in and CD-in)

• 1 S/PDIF connector for optical cable connection

• 1 connector for IrDA interface

• 4 Serial ATA connectors

• 2 IDE connectors

• 1 floppy connector

• 2 ATX power supply connectors

• 3 fan connectors for CPU fan, chassis fan and 2nd fan

• 4 diagnostic LEDs

• 1 diagnostic LED connector for external 4 diagnostic LEDs display

• EZ touch switches (power switch and reset switch)
Expansion Slots
• 1 AGP slot that supports 8x/4x AGP

• 5 PCI slots
PCB
• 4 layers, ATX form factor

• 30.5cm (12") x 24.5cm (9.64")