| Form |
Integrated Amplifier |
| Output power (20Hz - 20kHz) |
105W+105W (8ohms)
125W+125W (6ohms) |
| Input sensitivity/impedance |
Processor loop input: 150mV/30kohm |
| THD |
0.004% (20Hz - 20kHz, 52.5W, 8ohm) |
| Cross modulation distortion |
0.003% (an equivalent for 105W, 8ohms) |
| Dynamic power |
350W/2 ohm |
| TIM distortion |
Below measurement full limits |
| Slew rate |
More than ±350v/microsec |
| Output bandwidth |
5Hz - 80kHz (52.5W, 0.03%, 8ohms) |
| Line-in frequency |
4Hz - 250kHz, and +0 -3dB (1W, 8ohm) |
| Output load impedance |
0.1ohm or less |
| Output terminal |
Speaker: AorB:6-16ohm, A+B:12-16ohm
Headset-jack maximum except take-off: 410mW (8ohms), 8-400-ohm conformity |
| Input sensitivity/impedance |
Phono MM: 2.5mV/47kohm
Phono MC: 0.2mV/200 ohms
CD, Video1, 2, AUX/Tuner, Tape1, 2:150mV/30kohm |
The maximum except take-off/Output power
(processor loop included about an output) |
10V/150mV |
| THD (processor loop included about an output) |
0.002% (1kHz, 10V) |
| RIAA deflection |
20Hz-100kHz±0.3dB (MC IN - processor loop 出力含) |
Signal to noise ratio
(an input short circuit, the auditory sensation weighting A) |
Phono MM: 88dB (at the time of a 2.5mV input)
Phono MC: 69dB (at the time of a 0.25mV input)
Line: 107dB (at the time of a 150mV input) |
| Tone control characteristic |
Bass: ±10dB (100Hz)
Treble: ±10dB (10kHz) |
| The Subsonic Filter for Phono |
16Hz, -12 dB/oct |
| Picture in engine performance |
Frequency response: direct-current-10MHz±1dB
Rated voltage/impedance: 1 Vp-p 75 ohm |
| Power consumption (Electrical Appliance and Material Control Law) |
205W |
| Power source |
AC100V, 50Hz/60Hz |
| Dimensions (it is an included about a foot, a knob, a terminal, etc.) |
Width 434x height 157x depth of 397mm |
| Weight |
12.0kg |
