DBX 586

Dwukanałowy lampowy przedwzmacniacz / kompresor / limiter

DBX 586 ze srebrnej serii to już klasyka.

Dynamiczny dwukanałowy mikrofonowo-instrumentalny, lampowy, przedwzmacniacz, kompresor i limiter w jednym.

W środku znajdują się dwie ręcznie selekcjonowane lampy 12AU7. Dające znakomite, ciepłe, lampowe brzmienie, szerokie możliwości regulacji kompresji - od prawie niesłyszalnej, po dającej lekko przesterowany lampowy sound.

Opis urządzenia

• Hand selected and matched Premium 12AU7 vacuum tubes in path
• Mic or line/instrument inputs on each channel. +4/-10 operation
• Drive control for a wide variety of great tube effects
• PeakPlus limiting control
• 3-Band EQ with sweepable frequency, wide / narrow Q and hardwire bypass
• Optional TYPE IV Conversion System outputs
• Separate 1/4 in. insert sends and returns on each channel
• MICROPHONE INPUTS
• Connectors: Female XLR Pin 2 hot
• Type: Electronically balanced/unbalanced
• Impedance: 1.70 kOhm
• Optimum Microphone Impedance: 150 - 200Ohm
• Maximum Input Level: > +13 dBu, or +33 dBu with 20 dB pad engaged
• CMRR: > 115 dB at 60 Hz, > 110 dB at 1 kHz, > 75dB at 10 kHz
•
• LINE INPUTS
• Connectors: Female XLR Pin 2 hot and TRS 1/4"
• Type: Electronically balanced/unbalanced
• Impedance: 20.1 kOhm nominal, or 470 kOhm with rear-panel INST switch engaged
• Maximum Input Level: > +30 dBu, or +22 dBu with rear-panel INST switch engaged
•
• OUTPUTS
• Connectors: Male XLR Pin 2 hot and TRS 1/4"
• Type: Servo-balanced/unbalanced, RF filtered
• Impedance: Balanced 120Ohm, unbalanced 60 Ohm
• Maximum Output Level: +21.5 dBu, balanced or unbalanced
•
• INSERT
• Connectors: TRS 1/4"
• Type: Impedance balanced/unbalanced (SEND), electronically balanced/unbalanced (RETURN)
• Impedance: 100Ohm bal./50Ohm unbal. (SEND), 20k (RETURN)
• Nominal Send Level: +4 dBu
• Nominal Return Level: +4 dBu
•
• SYSTEM PERFORMANCE
• DRIVE Control Range: +10 dB to +60 dB
• LEVEL Control Range: -15 dB to +15 dB
• 0.5 dB Bandwidth: 15 Hz to > 90 kHz +0/-0.5 dB
• Frequency Response: <10 Hz to >200 kHz +0/-3.0 dB
• EIN: Typically -126 dBu, 150 source impedance, unweighted, 20 Hz to 20 kHz measurement bandwidth
• THD + Noise: 0.04% typical at +0 dBu out, 1kHz, 33 dB gain 3.5% typical at +21 dBu out, 1kHz, 35 dB gain
• Deviation From Linear Phase: < 20 degrees, 20 Hz to 20 kHz.
• Interchannel Crosstalk: Typically -98 dB, 20 Hz to 20 kHz.
•
• EQUALIZER
• LOW Frequency: 80 Hz, shelving filter
• HIGH Frequency: 12 kHz, shelving filter
• MID Frequency: Sweepable from 100 Hz to 8 kHz, bandwidth 1.5 octaves (WIDE) or 0.5 octaves (NARROW)
• Gain (all bands): Sweepable from -15 to +15 dB.
•
• PeakPlus LIMITER
• Type: Two-stage proprietary
• Threshold Range: 0 dBu to + 22 dBu (off)
•
• FUNCTION SWITCHES
• INSERT: Inserts a device connected to the rear-panel Return jack into the signal path.
• NARROW: Selects narrow (0.5 octave) bandwidth for the MID frequency control
• EQ: Enables the equalizer section
• LINE: Selects the Line inputs
• +48V: Enables the 48V phantom power for the Microphone input
• PAD: Attenuates the input signal by 20 dB.
• PHASE: Reverses pins 2 and 3 of the input XLR connector.
• LO CUT: Enables the 75 Hz, 12 dB/octave low cut filter
•
• METER SOURCE SWITCHES

więcej informacji:

http://www.dbxpro.com/product_downloads/owner_manuals/586manual.pdf

http://www.dbxpro.com/product_downloads/Data_Sheets/586cutsheet.pdf